Sekonic FLASHMATE L-308X-U - Specifications

37
9. Specications
●
9.
Specications
Type
●
Digital light meter for ambient and ash light
Light Receiving Method
●
Incident light and reected light
Light receiving section
●
Incident light Lumisphere, Lumidisc (optional accessory)
●
Reected light Lens (light receiving angle of 40°)
Light Receptor
●
Silicon photo diode
Measurement Mode
●
PHOTO Mode
●
Ambient light Shutter speed priority mode
Aperture priority mode
EV mode
●
Flash light Cordless ash mode
Cord ash mode
●
HD_CINE Mode
●
Ambient light Shutter speed priority mode
Frame rate setting mode
Simplied illuminance mode
●
CINE Mode
●
Ambient light Frame rate priority mode
Shutter angle setting mode
Simplied illuminance mode
Repeat accuracy
●
± 0.1 EV or less
Measurement range (ISO 100)
●
Ambient light Incident light EV 0 to EV19.9
Reected light EV 0 to EV19.9
●
Flash light Incident light F No. 1.0 to F No. 90.9
Reected light F No. 1.0 to F No. 90.9
●
Illuminance Incident light 2.50lx to 190,000lx
(in two signicant digits)
0.23fc to 17,000fc
Calibration Constant
●
Incident light metering Lumisphere C = 340 Lumidisc C=250
●
Reected light metering K = 12.5