Sekonic Litemaster Pro L-478D - Page 30

30
3) Luminance measuring in Candela per square
meter
1. Attach a 5-degree viewnder (sold
separately). (See P24 for details.)
2. Touch the Measuring mode icon to open
the Measuring Mode Selection Screen, then
touch the
icon to select Luminance
Measuring (cd/m
2
) Mode and return the
screen view to Measuring screen. (See P25
for details.)
3. While looking through the viewnder, place
the reading circle on the light source or
surface to be measured and press the
Measuring button
8
on the side of the
meter.
Release the Measuring button
8
to
complete the measurement. The measured
luminance (cd/m
2
) at that time will be
displayed.
While pressing the Measuring button
8
, the
meter measures continuously until it is
released.
4) Luminance measuring in Foot-lambert
1. Attach a 5-degree viewnder (sold
separately). (See P24 for details.)
2. Touch the Measuring mode icon to open
the Measuring Mode Selection Screen, then
touch the
icon to select Luminance
Measuring () Mode and return the screen
view to Measuring screen. (See P25 for
details.)
3. While looking through the viewnder, place
the reading circle on the light source or
surface to be measured and press the
Measuring button
8
on the side of the
meter.
Release the Measuring button
8
to
complete the measurement. The measured
luminance () at that time will be displayed.
While pressing the Measuring button
8
, the
meter measures continuously until it is
released.
[Measuring screen (cd/m
2
)]
Measuring value (cd/m
2
)
Measuring screen ()
Measuring value ()