Sekonic Litemaster Pro L-478D - Page 39

39
2) Setting ControlTL
®
Channels and Zones
1. Touch the Tool Box icon
at the bottom of
the Measuring screen to display the Tool Box
screen. Then touch the
[Radio CH/Zone] to
display the Radio CH/Zone Setting screen.
2. Touch the CTL tab.
3. Either touch the arrows ▲/▼ or slide the
channel number dial to select a channel.
4. Set one or more zones (A, B, C).
5. Touch the
[OK] to conrm settings and then
return to the Measuring screen. (Touch the
[Cancel] to cancel settings)
3) Setting Standard Channels and Zones
1. Touch the Tool Box icon
at the bottom of
the Measuring screen to display the Tool Box
screen. Then touch the
[Radio CH/Zone] to
display the Radio CH/Zone Setting screen.
2. Touch the STD tab.
3. Either touch the arrows ▲/▼ or slide the
channel number dial to select channel number
from 1 to 32.
4. When the channel number is set to 17 – 32,
Zones (A, B, C, D) will appear to select
(No Zones for channels 1 to 16)
5. Touch the
[OK] to conrm settings and return
to the Measuring screen. (Touch
[Cancel] to
cancel settings.)
<
•
The [OK] button must be touched to activate the ControlTL
®
and Standard Channel and Zone settings.
Tool Box Screen
Radio CH/Zone Setting Screen
(When ControlTL
®
system
is selected)
Radio CH/Zonel Setting Screen
(When Standard Channel is
selected)
Channel numbers
Channel numbers
Zones
Zones
Measuring screen
(Radio triggering Mode)
Tool Box
icon