Sekonic Litemaster Pro L-478D - 6-2. Mid. Tone Function

46
6-2. Mid. Tone Function
This is used to place a measured value at the center of the Analog EV Scale.
The Mid Tone function has four operations:

Sets current measured value as Mid Tone

Sets memorized value as Mid Ton

Modies Mid Tone value

Recalls Mid Tone Measuring Screen
6-2-1. Setting Measuring Value as Mid. Tone
1. Press the Measuring button
8
to take reading
and display the resulting value.
2. Touch the Tool Box icon
at the bottom of the
Measuring screen to display the Tool Box screen.
3. Touch the
[Mid. Tone Set] to display Mid. Tone
Set screen.
4. Touch the
[Set from Current Measurement] to
set the current measured value as the Mid. Tone
and return the meter to the Measuring screen.
<

Touchingthe[CLOSE]buttononanyscreencancelstheopera-
tion and returns the meter to the Measuring screen.
6-2-2. Setting Memorized Value as Mid. Tone
1. Touch the Tool Box icon at the bottom of
the Measuring screen to display the Tool Box
screen.
2. Touch the
[Mid. Tone Set] to display Mid.
Tone Set screen.
3. Touch the
[Set from Memory] to display Mid.
Tone Set from Memory screen and display all
memorized values.
will appear next to incident light
measurements;
will appear next to reected light
measurements. The analog scale will also appear
with measurement indicators displayed.
4. Touch the memorized value you want to set
as a Mid Tone. The display will return to the
Measuring screen and the analog scale will show
all memorized values with your selection as the
Mid Tone. Touch the
[CLOSE] to return to the
Measuring screen without setting the Mid. Tone.
Mid. Tone Set Screen
Mid. Tone Set Screen
Mid. Tone Set
(Memory) Screen