Sekonic Litemaster Pro L-478D - Page 57

57
2) Editing Exposure Prole
1. Press the Menu button
7
on the front of
meter. (See P21 for details.)
2. Touch
[5. Check/Edit Prole] to view prole
list in the Select Prole to Edit/Check screen.
3. Touch ▲/▼ or slide nger on bar to view the
name of the Exposure Prole you desire to use
and edit.
4. Touch the check box to display the prole in
the Set Prole screen. (A check mark indicates
prole is available for use. To deactivate the
prole, touch box again to return to □.)
5. Touch the prole name button to edit the
prole.
6. To edit prole name, touch the [Edit Prole
Name] to display the keypad. Input the name
(up to 31 characters) and touch
[OK] to enter
the prole name and return to prole edit
screen.
7. Touch one of the icons of Measuring mode
(Ambient/ash light) and light receiving
method (incident/reected light) to enter ISO
editing screen.
8. Touch ▲/▼ or slide nger on bar to view ISO
values and touch the desired ISO button to enter
the prole editing screen.
Edit Prole Screen
Check to display or not in the Set
Prole Screen