Sekonic ST-50M - Chapter 11. Pen Position Adjustment; Adjusting Temperature Pen Position

- 29 -
The operation menu for pen position adjustment is
as follows:
11-3. Adjusting temperature recording
pen position
①
When the “Pen position adjustment status” screen (P0)
is displayed, press the
【
FUNCTION
】
key.
②
Press the
【
ENTER
】
key. The indication on the right side
(---) will start blinking.
③
Use the
【▲】
or
【▼】
key to enter “5” to bring the pen 5
mm from the left side of the chart paper, then press the
【
ENTER
】
key. The entered number will stop blinking to
show the setting has been completed.
11-4. Adjusting humidity recording pen position
①
When the “Pen position adjustment status” screen (P 0)
is displayed, press the
【
FUNCTION
】
key twice.
②
Press the
【
ENTER
】
key. The indication on the left side (--)
will start blinking.
③
Use the
【▲】
or
【▼】
key to enter “5” to bring the pen 5
mm from the left side of the chart paper, then press the
【
ENTER
】
key. The entered number will stop blinking to
show the setting has been completed.
CAUTION
• The adjustable range is from -5 mm to +5 mm on the
chart paper.
• The
【▲】
key moves the pen to the right side while
the
【▼】
key moves it to the left side.
• To cancel this setting, press the
【
FUNCTION
】
key
and proceed to the next setting item.
11-5. To initialize the adjusted value
Follow the procedure below to initialize the adjusted value.
If it is not necessary, skip this paragraph.
①
When the “Pen position adjustment status” screen (P0)
is displayed, press the
【
FUNCTION
】
key 3 times, The
『
CLEAR
』
indication will appear and start blinking.
②
Press the
【▼】
and
【
ENTER
】
keys together. The ad-
justed value will be cleared and the “Pen position adjust-
ment status” screen (P 0) will be restored.
CAUTION
• To initialize means to restore the factory-setting.
• To return to the normal measurement screen, turn
OFF (
【
】
) the power switch.
Turn ON the power while pressing
the【 】 and 【ENTER 】 keys.
Pen position adjustment status (P 0)
Press 【FUNCTION 】 key
Temperature pen position adjustment
Humidity pen position adjustment
Pen position adjusted value initialization
Press 【FUNCTION 】 key
Press 【FUNCTION 】 key
Press 【FUNCTION 】 key