SEL
SEL-9524 GNSS Antenna
Information Sheet
What's Included?
Surface Mounting Instructions
The SEL-9524 GNSS Antenna can be mounted using an
SEL 915900043 Antenna Pipe Mounting Kit or
915900044 Antenna Surface Mounting Kit.
Pipe Mounting Instructions
Step I. Feed one end of LMR-400 or RG-8X
coaxial cable through the pipe and the
Pipe-Mount Adapter.
Step 2. Attach the end of the cable to your
antenna by using the TNC connector.
Step 3. Use the Pipe-Mount Adapter to attach the
antenna to the pipe.
Step 4. Mount the antenna in an area with a
clear, unobstructed view of the sky.
Step 4. Mount the surface mounting bracket so
that the antenna has a clear, unobstructed
view of the sky.
Specifications
GPS (SEL-9524A) or
GPS/GLONASS (SEL-9524B)
1575.42:t 2 MHz (SEL-9524A)
1570-1606 MHz (SEL-9524B)
> 40 dB
50 ohms
-50° to +85°C
95%
TNC female
IP68 when connected to a sealed
TNC connector
Compliance
Step I. Insert the antenna TNC connector
through the hole in the antenna surface
mounting bracket.
Step 2. Secure the antenna to the bracket by
using the two provided locking nuts.
Step 3. Connect the LRM-400 or RG8X cable to
the antenna's TNC connector.
Frequency Band:
LNAGain:
Nominal Impedance:
Operating
Temperature:
Humidity:
Connector:
Weather Protection:
Constellations:
Designed and manufactured under an ISO 9001
certified quality management system
C E:
EMC Directive, Low-Voltage Directive
Learn More
Surface-Mount
Nuts
Pipe-Mount
Adapter
~
Antenna
/
Installation
Please visit https://www.selinc.com/SEL-9524/
Pullman, Washington U.S.A.
Tel: +1.509.332.1890 • Fax: +1.509.332.7990 • www.selinc.com • info@selinc.com
@
2015-2016
by Schweitzer Engineering laboratories. Inc.•
20160225
To Next Page
General