Selec TC544C

K
RTD
SENSOR
SELECTION
VERIFICATION
VALUE (°C)
25.0
0.0
475.0
323.5
975.0
800.0
CALIBRATION CERTIFICATE
Model No : TC544C
Claimed Accuracy :
For TC inputs : 0.25% of FS ±1°C
For R & S inputs : 0.5% of F.S ±2°C
(30 min of warm up time for TC input)
For RTD inputs : 0.1% of FS ±1°C
Standard used for Calibration of product is
traceable to NABL
The calibration of this unit has been verified at the
following values :
The thermocouple / RTD curves are linearized in
this microprocessor based product; and hence the
values interpolated across the input range are also
equally accurate ; at every point in the curve.
Unit is accepted as accuracy is within the specified
limit of claimed accuracy and certificate is valid upto
one year from the date of issue.
(Specifications are subject to change, since development is
a continuous process.)
Selec Controls Pvt. Ltd., India
Factory Address :
EL-27/1, Electronic Zone, TTC Industrial Area, MIDC, Mahape,
Navi Mumbai - 400 710, INDIA.
Tel. No. : +91-22-41 418 452/468 | Fax No. : +91-22-28471733
Toll free : 1800 227 353 (BSNL/MTNL Subscribers only)
Website : www.selec.com | Email : sales@selec.com
Doc. Name : OP INST TC544C OP723-V03(Page 4 of 4)