SELF SLPU Series - Page 3

3-way Switching Function
(
for SLPU-2P2U1S-BT-BK/SLPU-2P2U1S-BT-WH/SLPU-2P2U1S-BT-NI ONLY)
Pairing
Unpair Bluetooth for 3-way version power units
1
Power on
Press any power unit’s start button more than 3 seconds,
until the blue indicator beside button starts flashing, loosen the button.
Short press the button of another power unit, the blue indicator will
stop flashing, meaning the pairing is successful.
press any paired power unit’s switch, all the lights that powered by paired
power units can be contolled.
flashing
stop flashing
2
1
Power on
Press power unit’s start button more than 3 seconds,
until the blue indicator button starts flashing, loosen the button.
flashing
2
3
Short press the button of this power unit, the blue indicator will
stop flashing, meaning the unpairing is successful.
stop flashing
3
4
SELF Electronics USA Corporation
Tel: +1-770-248-90233264 Saturn Ct,Peachtree Corners,GA 30092
salesus@self-electronics.com
POWER UNIT
3s
3s