Do you have a question about the SELVA MARINE Manta 40 and is the answer not in the manual?
Brand | SELVA MARINE |
---|---|
Model | Manta 40 |
Category | Outboard Motor |
Language | English |
Explains the sequential step-by-step format and the use of symbols.
States illustrations represent all designated models.
Mentions cross references are minimized and direct to appropriate sections.
Symbols used as thumb tabs to indicate chapter content.
Symbols used to indicate specific data points within the manual.
Symbols indicating lubricant grade and location in exploded diagrams.
Symbols indicating sealant/locking agent grade and application points.
Details model name, serial number, and approval codes.
Provides essential safety precautions for handling and working with the equipment.
Specifies the types of oils, greases, and sealing fluids to use.
Outlines recommended practices for performing work efficiently and safely.
Explains procedures for taking apart and putting together components.
Lists and illustrates necessary specialized tools for maintenance and repair.
Provides overall dimensions, weight, performance, and power unit details.
Details specific measurements and tolerances for engine components.
Lists specified torque values for various fasteners and assembly points.
Outlines recommended maintenance schedules based on operating hours or time.
Covers checks and adjustments related to the engine cover.
Details checks and maintenance for fuel lines, filters, and pumps.
Explains adjustments for shift and throttle cables, idling speed, and related systems.
Covers checks and replacement procedures for engine oil, filters, and pressure.
Addresses checks related to the cooling water discharge.
Illustrates the correct routing of all hoses within the fuel system.
Covers removal, installation, and checking procedures for fuel system components.
Details the disassembly and assembly of the fuel pump.
Explains removal and installation of the carburetor assembly.
Covers disassembly, assembly, checking, and adjusting carburetor components.
Details removal and installation of the flywheel magnet assembly.
Covers removal, installation, disassembly, and checking of the recoil starter system.
Explains procedures for disconnecting/connecting leads, hoses, and the entire power unit.
Details removal and installation of the stator assembly and related components.
Covers removal, installation, and checking of the entire lower unit.
Details removal, installation, and checking of the water pump and its components.
Explains removal and installation of the shift rod assembly.
Covers removal, installation, disassembly, and checking of the propeller shaft housing.
Details removal, installation, and checking of the drive shaft and its related parts.
Covers disassembly, assembly, and checking of the lower case components.
Explains the process of selecting and installing shims for gear backlash adjustment.
Details procedures for measuring and adjusting forward and reverse gear backlash.
Details removal, installation, disassembly, and assembly of the tiller handle components.
Covers removal and installation of the bottom cowling.
Details removal, installation, and disassembly of the upper case components.
Covers removal, installation, and checking of the steering arm and its components.
Details removal and installation of the clamp brackets.
Identifies and illustrates key electrical components.
Provides detailed wiring diagrams and color codes for connections.
Explains how to test and measure various electrical components.
Details checks for switches, coils, CDI, and sensors.
Covers checks for battery, fuses, wire harness, and starter relay.
Explains disassembly, assembly, checking, and measuring of the starter motor.
Details checks for fuses, battery, rectifier/regulator, and lighting coil.
Covers checks for battery, fuses, main switch, power coil, and thermo heater plunger.
Details checks for fuses, battery, relays, switches, and trim sensor.
Provides a general guide for troubleshooting common engine issues.
A detailed chart correlating symptoms with potential causes and reference chapters.
Specific steps for diagnosing ignition system issues related to peak voltage.