Need help?Do you have a question about the Sencor SCA AMP4350 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| RMS power at 4 Ohms | 4 x 50 W |
| RMS power at 2 Ohms | 4 x 75 W |
| Bridged power at 4 Ohms | 2 x 150 W |
| Frequency response | 20 Hz - 20 kHz |
| Signal-to-noise ratio | > 90 dB |
| Input impedance | 10 kΩ |
| Power supply | 12 V DC |
| THD | <0.05% |
| Input sensitivity | 200 mV – 6 V |
| Low pass filter | 50Hz - 250Hz |
| Bass boost | 0dB - 12dB |
| Protection | Thermal, Overload, Short Circuit |
| Operating Voltage | 10 V - 16 V |
To Next Page