Menu Operation
• PVR Settings (In DTV mode)
Press the ▲/▼ button to highlight PVR Settings, then press ENTER
button to enter
sub-menu.
• Mode Setting
Press ◄/► button to select Store mode or Home Mode.
It is recommended to set the TV to Home Mode.
• Time Settings
Press the ▲/▼ button to highlight Time Settings, then press ENTER button to enter
sub-menu.
OSD Time: Select the length of time the OSD will remain active.
Sleep Timer: Select the time after which the TV will automatically switch to standby
mode.
Auto Sleep: Select the time after which the TV will automatically switch to standby
mode if no user operation has been detected.
Time Zone: Select your time zone.
enter sub-menu. If you want to set the time manually, set Auto Sync to Off.
Note: After a power failure, the time settings will be lost.
• Blue Screen
Press the◄/►button to select blue screen On or Off.
Date and Time: Press the ▲/▼ button to highlight Time, then press ENTER button to
Press the ENTER button to set the parameters for recording a video: frequency,
channel, start time and end time.
Once recordings are scheduled, you can go back to the previous screen and:
Delete One: Press the green button to delete the highlighted video.
Delete All: Press the yellow button to delete all videos.
Digital programme recording
1. Insert a USB disk, Press button to record the current programme. During the
recording, press button to display/hide the record menu.
2. Press button to stop recording, it will return to normal broadcast television.
File Manager: This option is used to display the list of recordings.
Replay:
Press the red button to replay video.
Delete One: Press the green button to delete the highlighted video.
Delete All: Press the yellow button to delete all videos.
Full: Press the blue button to zoom in the video.
Device List: When multiple recording devices are connected, they are listed here.
Select one recording device in the Device List.
Format: Press the red button to format USB disk.
Scheduled Record: This option is used to set the parameters for the recordings you
want to schedule.
The insertion of USB device is automatically detected.
To Next Page
Loading...
