EasyManua.ls Logo

Sencor STS 5050SS - Page 3

Sencor STS 5050SS
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
05/2017
- 3 -
Copyright © 2017, Fast ČR, a.s.
The temperature of accessible surfaces may be higher during operation and after operation as aresult of residual heat.
Take care not to touch the hot surface. Pay special attention when removing smaller pieces of bread products out of
the appliance.
Do not leave the appliance without supervision when it is in operation.
Never cover the appliance when it is in operation or hot.
Do not insert excessively large pieces of bread products into the toasting slots or insert bread products wrapped in
aluminium foil or metal items. Otherwise there is arisk of re or injury by electrical shock.
Never toast bread products by placing them horizontally directly on the toasting slots. This would interrupt air circulation
and could result in are.
Attention:
Never attempt to take out ajammed piece of bread or any other bread product using aknife or another metal
object. This could lead to injury by electrical shock or damage the appliance. If bread products become jammed
inside the toasting slots, turn o the appliance, disconnect it from the power socket and allow it to cool down.
Then carefully remove the bread products that are jammed inside the appliance.
Always turn o the appliance and disconnect it from the power socket when leaving it without supervision or when
not using it and before cleaning or moving it. Allow the appliance to fully cool down before moving, cleaning and
storing it.
The removable crumb tray must be regularly cleaned out so that crumbs do not accumulate inside it. When cleaning
it, follow the instructions in chapter Cleaning and maintenance. To prevent potential injury by electrical shock, do not
submerge this appliance or its power cord in water or any other liquid.
Disconnect the appliance from the power socket by pulling on the plug, never pulling on the power cord. Otherwise,
this could damage the power cord or the socket.
If the power cord is damaged, it must be replaced by an authorised service centre or by another similarly qualied
person, this will prevent the creation of adangerous situation. It is forbidden to use the appliance if it has adamaged
power cord.
Do not use the appliance if it is damaged, not working correctly, if it has been dropped on the oor or submerged in
water. In order to prevent ahazardous situation arising, do not repair the appliance yourself or modify it in any way.
Have all repairs performed at an authorised service centre. By tampering with the appliance, you risk voiding your legal
rights arising from unsatisfactory performance or quality warranty.

Related product manuals