To Next PageTo Next Page
Need help?Do you have a question about the Sencor SWS 12500 and is the answer not in the manual?
Identifies and describes the physical parts of the console unit.
Details the various sections and indicators shown on the weather station's LCD screen.
Guide for installing the wireless outdoor sensor, including battery and pairing.
Instructions for assembling the mounting stand and pole for the outdoor sensor.
Procedure for setting up the console, including Wi-Fi connection and sensor pairing.
Steps for installing the backup button cell battery in the console.
Instructions for powering up the console, setting display angle, and understanding its memory.
Procedures for resynchronizing, changing batteries, and pairing new sensors.
Explores additional settings and functions available on the weather station console.
Information on how the console displays sunrise and sunset times based on location data.
Details on displaying and understanding indoor/outdoor temperature and humidity readings.
How to interpret signal strength indicators for wireless sensors and troubleshoot connection issues.
Overview of wind speed/direction display, units, format, and mode selection.
Details the heat index calculation and its warning levels based on temperature and humidity.
How the console predicts weather based on barometric pressure data.
Information on rainfall and rain rate measurements and display modes.
How the console records and allows review of maximum and minimum weather data.
How to view recorded weather data from the past 24 hours.
How to adjust the console's backlight brightness using the HI/LO/AUTO switch.
How to adjust the LCD contrast for better viewing angles.
Guidance on when and how to replace batteries for the console and sensors.
Instructions for cleaning and maintaining the outdoor 7-in-1 sensor components.
Technical details for the console unit, including dimensions, power, and Wi-Fi specs.
Technical details for the wireless sensors, including RF range and supported types.
Details on barometer units, measuring range, accuracy, resolution, and forecast data.
Specifications for indoor temperature, including units, accuracy, resolution, and memory.
Specifications for indoor humidity, including units, accuracy, resolution, and memory.
Technical details for wind speed and direction, including units, range, accuracy, and display modes.
Details on rainfall units, rate, accuracy, range, resolution, and display modes.
Specifications for UV index, including display range, resolution, and memory.
Details on light intensity units, display range, resolution, and memory.
Specifications for weather index modes, display ranges, and memory.
Dimensions, weight, power, and data transmission for the Thermo-Hygro sensor.
Technical details of the power adapter, including input/output voltage and current.
Steps to create an account and register your weather station on the Weather Underground website.
How to adjust offset and gain values for various measurement parameters for accuracy.
How to view your live weather data on the Weathercloud website.
General| Temperature Range (Outdoor) | -20°C to +60°C |
|---|---|
| Humidity Range (Indoor) | 20% to 95% |
| Humidity Range (Outdoor) | 20% to 95% |
| Display Type | LCD |
| Wireless Transmission | 433 MHz |
| Model | SWS 12500 |
| Barometer | Yes |
| Hygrometer | Yes |
| Thermometer | Yes |
| Clock | Yes |
| Weather Forecast | Yes |
| Indoor Temperature | Yes |
| Outdoor Temperature | Yes |
| Indoor Humidity | Yes |
| Outdoor Humidity | Yes |
| Radio Controlled Clock (DCF77) | Yes |
| Temperature Range (Indoor) | 0°C to +50°C |
| Power Supply (Outdoor Unit) | 2 x AA batteries (not included) |
| Wireless Sensor Range | Up to 100 m in open area |
| Type | Weather Station |
