SENDO YKR-T/021E - Page 12

2. PRECAUTIONS
PRECAUTIONSPRECAUTIONS
NOTENOTE
* Before rst time use of the remote controller, install the batteries and ensure the “+” and “-” poles are correctly positioned
* Ensure the remote controller is pointed to the signal receining window, and that there is no abstruction in between and the
distance is 8m at the maximum.
* Do not let the remote controller drop or ing it at will.
* Do not let any liquid in the remote controller.
* Do not expose the remote controller directly to the sunlight or excessive heat.
* If the remote controller does not function normally, remove the batteries for 30 seconds before reinstall them. If that doesn’t
work, replace the batteries.
* When replacing the batteries, do not mix the new batteries with old ones or mix batteries of dierent types, which could cause
failure of the remote controller.
* If the remote controller is not to be used for a long period of time, remove the batteries rst, lest the leakage from them may
damage the remote controller.
* Properly dispose the discarded batteries.
* This is a universal remote controller which provide all the function buttons. Please understand that some of the
buttons may not function, depending on the specic air conditioner you have purchased. (If a specic function is
not available on the air conditioner, pressing the corresponding button will simply have no respond.)
* HEAT and ELE.H functions are not available for cool only models, thus these two buttons do not work
correspondingly.
12