•
•
•
•
•
•
•
•
•
Do not block any ventilation openings on the product, as
shown below.
Never push any objects into the openings or slots on the
product. Doing so may create an electric shock or fire hazard.
Maintain sufficient distance around your product for sufficient
ventilation; do not put anything within at least 6 inches of light
bulb socket.
For best protection against lightning, unscrew the product
from its power source during a storm.
Only use accessories specifically recommended by the
manufacturer.
Refer all servicing to qualified SENGLED service technician.
Servicing is required when the product:
1) Has been damaged in any way;
2) Liquid has been spilled on the product;
3) Objects have fallen into the product;
4) The product has been exposed to rain or moisture,
5) The product does not operate normally, or has been
dropped.
Repairs must be performed by a qualified SENGLED
technician.
For bulbs with a weight significantly higher than the bulbs for
which they are a replacement, the increased weight may
reduce the mechanical stability of certain luminaires and bulb
holders and this may impair contact and bulb retention. Check
all sockets and bulb holders frequently and make sure they are
secure and stable.
The bulb can be hot and should not be touched without
taking care.
To Next Page
Loading...