2
WWW.SENIXTOOLS.COM
TABLE OF CONTENTS
SAFETY SYMBOLS
PARTS
TROUBLESHOOTING
WARRANTY
COMPONENT LOCATION
ASSEMBLY
SAFETY SYMBOLS................................................2
TECHNICAL DATA..................................................3
GENERAL POWER TOOL SAFETY WARNINGS..4
SPECIFIC SAFETY RULES FOR POLE
PRUNERS...............................................................4
BATTERY CHARGER SAFETY WARNINGS.........5
EMERGENCY..........................................................6
REDUCING KICKBACK..........................................7
SAWING TECHNIQUES.........................................7
To reduce the risk of injury, user must
read instruction manual.
Wear ear protection.
Wear eye protection.
Wear dust mask.
Wear hand protection.
Wear non-slip safety footwear.
Failure to keep your hands away
from the blade will result in serious
personal injury .
Avoid power lines, use in dry
conditions.
Do not expose to rain.
DANGER!
Risk of electrocution!
Thrown objects can ricochet and result
in personal injury or property damage.
Keep all bystanders at least 50 ft.
away.
Contact of the guide bar tip with any
object should be avoided.
Tip contact can cause the guide bar
to to move suddenly upward and
backward,which can cause serious
injury.
EXPLODED VIEW................................................14
TROUBLESHOOTING TABLE..............................16
LIMITED TWO-YEAR WARRANTY........................18
KNOW YOUR POLE SAW......................................8
ASSEMBLY OF GUIDE BAR AND SAW CHAIN.....9
TENSIONING THE CHAIN......................................9
SAW CHAIN LUBRICATION..................................10
FILLING THE OIL TANK........................................10
ATTACH /REMOVE THE BATTERY.......................10
OPERATION..........................................................11
ADJUSTING THE TELESCOPING HANDLE.........11
ADJUSTING THE HARNESS................................11
TURNING THE POLE SAW ON AND OFF..............11
CLEANING.............................................................12
REPLACING THE SAW CHAIN AND GUIDE
BAR.......................................................................12
CHECKING THE AUTOMATIC CHAIN
LUBRICATION.......................................................13
STORAGE.............................................................13
Always use two hands when
operating the chain saw.
CONTENTS/SAFETY
To Next Page
Loading...
