Do you have a question about the Sennheiser DW Pro 1 and is the answer not in the manual?
Headset type | Monaural |
---|---|
Product type | Headset |
Product color | Black |
Wearing style | Head-band |
Volume control | Digital |
DECT connectable | Yes |
Recommended usage | Office/Call center |
Wireless range | 180 m |
Connectivity technology | Wireless |
Impedance | - Ω |
Magnet type | - |
Ear coupling | Supraaural |
Diaphragm diameter | 50 mm |
Headphone frequency | - Hz |
Microphone type | Boom |
Standby time | 100 h |
Charging time | 1 h |
Number of batteries supported | 1 |
Storage temperature (T-T) | -20 - 70 °C |
Operating temperature (T-T) | 5 - 45 °C |
Cables included | Audio (3.5mm), USB |
Weight | 65 g |
---|
Configuring headset system behavior using DIP switches for various functions like range, audio, and link establishment.
Manual controls for handset lift/hang-up and hook switch functionality via headset.
Settings for manual or automatic wireless link establishment between headset and base station.
Configuration for narrowband and wideband audio transmission for call quality.
Steps to connect multiple guest headsets to the master headset and base station for a conference call.
Procedure for terminating an active conference call.
Instructions for replacing the ear pads on the headset for comfort and hygiene.
Guidance on simultaneously charging several headsets.
Information on performing firmware upgrades using the Sennheiser Updater software.
Resource to check telephone headset compatibility.
Details on additional accessories available for the headset system.