Sennheiser MKE 40 - Technical Data Overview

Technical Data MKE 40 ...
Frequency response 40 - 20 000 Hz
Acoustical mode of operation pressure gradient transducer
Directional characteristic cardioid
Free-field open-circuit sensitivity 8 mV/ Pa ± 2.5 dB (1000 Hz)
Equivalent noise level 27 dB A-weighed (DIN IEC 651)
37 dB CCIR weighted (CCIR 468-1)
Sound pressure level limit 133 dB at 1 kHz (K=1%)
Dimensions in mm Ø12, approx. 26 long
...-2 R Rated impedance ca. 1,3 kOhm
Minimal terminating impedance 15 kOhm
Feed from transmitter SK 2012
Plug Microdot
Cable length approx. 1,1 m
Delivery includes: 1 Wind-shield MZW 40 black
1 Wind-shield MZW 40 grey
1 Magnet holder set MZM 2 / MZM 10
1 Clip
...-4 Rated impedance ca. 1,3 kOhm
Minimal terminating impedance 15 kOhm
Feed from transmitter SK 50 or SK 250
Plug Lemo-plug 4 pins
Cable length approx. 1,6 m
Delivery includes: 1 Wind-shield MZW 40 black
1 Wind-shield MZW 40 grey
1 Magnet holder set MZM 2 / MZM 10
1 Clip
...-60 Rated impedance ca. 130 Ohm
Minimal terminating impedance 300 Ohm
Feed from K6/K6P feed modul
Plug Special plug system K6
Cable length approx. 3 m
Delivery includes: 1 Wind-shield MZW 40 black
1 Clip black
...-P Rated impedance ca. 50 Ohm
Minimal terminating impedance 1000 Ohm
Feed phantom feed 12-48V
Plug XLR-3 plug with integrated
phantom feed adapter
Cable length approx. 3 m
Delivery includes: 1 Wind-shield MZW 40 black
1 Clip black