Need help?Do you have a question about the Sennheiser MZN 16 P48 and is the answer not in the manual?
General| Type | Phantom Power Supply |
|---|---|
| Voltage | 48 V |
| Connector | XLR |
| Weight | 0.1 kg |
| Compatibility | Microphones requiring P48 phantom power |
Details wiring differences between MZN 16 P 48 and MZN 16 P 48-U models.
Specifies pin configurations for DIN 41524 connectors.
Specifies pin configurations for XLR-3 connectors.
Identifies the ground connection point on the rear panel.
Details the output connectors and input sockets on the unit.
Describes the function indicator LED and connectors for a second microphone.
Explains the unit's function for powering condenser microphones with phantom power.
Lists the MZN 16 P 48 and MZN 16 P 48-U variants and their connector types.
Provides guidance on connecting signal outputs to microphone inputs.
Covers power input voltage range and consumption.
Details DC output voltage, current limits, and noise voltage.
Lists appropriate connectors and pin assignments for both models.
Provides the physical size and weight of the unit.
To Next Page
