Need help?Do you have a question about the Sennheiser SI 1015 and is the answer not in the manual?
Controls the power state of the device.
Adjusts audio levels and indicates signal overload for channels A and B.
Selects audio channel modes: A, B, 2x mono, or stereo.
Emits infrared signals for direct monitoring via an IR receiver.
Connects radiators via RF sockets or barrier strips and provides DC outputs.
Provides AF inputs for channels A and B.
Connects the plug-in mains unit or an alternative DC power source.
BNC RF connections and a mono/multi-channel selector switch.
Inputs for powering the unit and outputs for daisy-chaining.
Secures the power cable connector to prevent accidental disconnection.
Details on using accessories for 19" rack mounting.
Instructions for connecting radiators using coaxial cables or barrier strips.
How to power multiple radiators from a single source.
Lists coaxial cables, couplers, and rack mounting modules.
Specifications for operating voltage, current, frequencies, and inputs/outputs.
Specifications for transmitting diodes, radiating power, and wavelength.
Technical details for the power supply unit.
General| Brand | Sennheiser |
|---|---|
| Model | SI 1015 |
| Category | Modulator |
| Language | English |
To Next Page
