Do you have a question about the Sennheiser SKM 4031 and is the answer not in the manual?
Type | Handheld Transmitter |
---|---|
Polar Pattern | Cardioid |
Transducer Principle | Dynamic |
Modulation | FM |
THD | < 0.5% |
Frequency Response | 40 Hz - 18 kHz |
Power Supply | 2 x AA batteries |
RF Output Power | 50 mW |
Audio Frequency Response | 40 Hz - 18 kHz |
Signal-to-Noise Ratio | > 110 dB |
Connector | None (Wireless) |
Frequency Range | Depends on frequency band variant |
FM-wideband, one channel in the 32-45 MHz range. RF-output power: 10 mW.
FM-wideband, one channel in the 32.55-38.05 MHz range. RF-output power: 10 mW.
Identical to the SKM 4031 but with 50 mW RF-output power.
FM-narrowband, one channel in the 32-45 MHz range. RF-output power: 10 mW.
FM-narrowband, one channel in the 138-260 MHz range. RF-output power: 20 mW.
FM-wideband, one channel in the 446-958 MHz range. RF-output power: 20 mW.
Instructions for inserting batteries, checking polarity, and interpreting LED indicators for battery status.
Guidance on adjusting modulation levels based on speaking distance and sound pressure for singing and speech.
Information on using the roll-off filter to attenuate bass frequencies, particularly for moderation use.
Tips for optimal microphone use, including speaking distance, handling, and using accessories.
Detailed technical specifications for the SKM 4031 model including frequencies, stability, and power.
Technical specifications for the SKM 4031 R variant, focusing on carrier frequency and RF output power.
Technical specifications for the SKM 4031-1 variant, highlighting RF output power and operating time.
Technical specifications for the SKM 4031-6 variant, detailing frequency range and stability.
Technical specifications for the SKM 4031-9 variant, including frequency range and deviation.
Technical specifications for the SKM 4031-90 variant, covering frequency and RF output power.
Technical specifications for the SKM 4031 TV variant, focusing on frequency range and stability.