Features—Benets
• Works with any modulator
• Easy to install
• Master system can be used independently for up to 750 sq. ft. of coverage
• SZI 30 slave emitters offer increased coverage
• Connects to line level audio source via 1/8" or 1/4" plug unbalanced
• 1-year warranty
Technical Data
– noitaludoM
zHk 05± noitaived lanimoN
zHM 6 .xam seicneuqerf reirraC
– tupni FA
AF input voltage for nominal deviatio –
rotaludom no sdneped esnopser ycneuqerf FA
THD (1 kHz, nom. dev.) ≤ 1 %
AF signal-to-noise ratio ≥ 60 dB(A) rms
05 a htiw kcaj onom "8/1 tuptuo FR–tupni FR Ω term. impedance
k 02 .xorppa ecnadepmi tuptuO Ω or 50 Ω
11 sedoid RI
Max. coverage area approx. 750 sq. ft., single-ch./ 375 sq.ft. in two channels
Radiating power approx. 0.5 W
tekcos saxeT nip-2 aiv CD V 72–42 egatlov gnitarepO
Am 051 .xorppa noitpmusnoc tnerruC
45.3 x 89. x 46.4 .xorppa mm ni snoisnemiD
zo 67.4
.xorppa thgieW
Product Variants
SI 30 Modulator/Emitter
SZI 30 Infrared Emitter
NOTE: Power supply is not included. Please order as required.
Radiator cluster with four IZK 20 clamps and IZM 20
cluster mounting kit
Front view of SI 30/SZI 30
Back view of SZI 30
SZI 30
The SZI 30 is a small area emitter which can be fed modulated signals from an SI 30 or any
other wideband modulator. It has no charging compartments, the LED on the right of the
front panel serves as a power indicator instead, showing that a supply voltage is present.
At the back of the SZI 30 you have—besides the DC input connector—two RF sockets. If
no plug is connected to the output socket, a 50 Ω terminating impedance is switched into
the RF connection.
To Next Page
Need help?
General
