Need help?Do you have a question about the Sensaphone IMS-1000 and is the answer not in the manual?
General| Model | IMS-1000 |
|---|---|
| Enclosure Rating | NEMA 1 |
| Communication | Ethernet |
| Humidity Range | 0% to 100% RH |
| Weight | 3.5 lbs |
| Monitored Parameters | Temperature, humidity, power, water |
| Notification Methods | Email, SMS, Phone call |
Lists essential precautions for safe operation and to prevent damage to the unit.
Details compliance with FCC rules, including Part 68 and Part 15 regulations.
Outlines the warranty period, limitations of liability, and claim procedures.
Introduces the IMS-1000 system, its key features, and contact information for support.
Covers physical layout, ports, and initial setup steps like rack or tabletop mounting.
Guides on connecting various sensors and configuring network settings like IP addresses.
Details battery specifications, service life, and the procedure for replacing it.
Lists operating parameters like temperature, power, and communication protocols.
Details sensor types, connectors, cable length, and visual indicators for monitoring.
Configures system properties, network settings, and modem parameters for the IMS-1000.
Covers voice messages, sensor templates, user profiles, and contact setup.
Details programming environmental inputs, alarm logic, and IP alarms.
Explains network camera setup, viewing history, and managing programming files.
Details how to configure and control the relay output via different modes.
Explains how alarms are delivered to contacts and how they can be acknowledged.
Provides examples of email, fax, and pager alarm messages.
Describes how to get status reports and receive voice alarm notifications.
Details SNMP agent setup, parameter access, and limitations.
Installation, configuration, and specifications for various temperature sensors (IMS-4810, 4811, 4812, 4813, 4814).
Installation, configuration, and specifications for humidity sensors (IMS-4820, 4821).
Installation, configuration, and specifications for water detection sensors (IMS-4830).
Installation, configuration, and specifications for power and current monitoring sensors (IMS-4840, 4841, 4842).
Installation, configuration, and specifications for dry contact, 4-20mA bridges, and door switches (IMS-4850, 4851, 4860).
Installation, configuration, and specifications for motion and smoke detection sensors (IMS-4861, 4862).
Contact information for technical support regarding IMS-1000 sensors.
Outlines weekly tests for unit functionality, inputs, and battery backup.
Addresses common software and network issues like dialing, connectivity, and programming.
Provides a list of part numbers and descriptions for IMS-1000 accessories.
Provides steps for returning a unit for service, including required information and shipping.
A template for recording weekly test results for inputs, dialout, call-in, and battery.
To Next Page
