SensComp 600 Series - User Manual

Description
SensComp, Inc.
36704 Commerce Rd.
Livonia, MI 48150
Telephone: (734) 953-4783
Fax: (734) 953-4518
www.senscomp.com
SensComp's totally integrated Series 600 Smart Sensor simplifies product design and packaging.
Features:
50 KHz Electrostatic Transducer
Integrated SMT Drive Electronics
TTL Compatible
Convenient Pin Terminal Connection
Monostable and Astable Modes of Operation
Voltage Regulated
Beam Angle of 15° at -6 dB
Low Ring Characteristics
Ranges from 6” to 35’
Excellent Receive Sensitivity
Available with all Series 600 Transducers
Specifically intended for operation in air at ultrasonic
Frequencies
PID# 615088 – Instrument Grade Smart Sensor
PID# 615089 – Environmental Grade Smart Sensor
PID# 615090 – Open Face Smart Sensor
PID# 615095 – Environmental Grade Smart Sensor w/Parylene
Self Contained Compact Design
Easy to Interface with Minimum of External Components
Can be Triggered Internally or Externally
Will Operate on a Power Source from 6 to 24 VDC
Level Measurement, Proximity Detection, Presence Detection,
Robotics, Educational Products
The new SensComp Smart Sensor is based on the ultra-sensitive
Series 600 Electrostatic Transducer line with an enhanced
version of our 6500 ranging module on board. The new voltage
regulated circuitry allows the sensor to operate from a 6 to 24
VDC power source.
The TTL compatible open collector outputs include pull-up
resistors. Configuration of the new oscillator circuit enables the
unit to be externally triggered or continually sense at 5 Hz.
The digitally controlled gain and variable bandwidth amplifier
minimizes noise and side lobe detection in sonar applications.
The typical absolute accuracy is ±1% of the reading over the
entire range.
This new compact integrated design of SensComp’s Series 600
Smart Sensor will expedite the product development process
For more information, visit our website: www.senscomp.com
Copyright © 2004 SensComp. Inc. 02/05/09
Features
Part No.
Benefits
Smart Senso
r
Specifications
Applications
Smart Sensor
(CLK)
Programmable Jumpe
r
OSC
ECHO
6-24 VDC
GND
BINH
INIT
BLN
K
Gain
J1
Adjust
(VR1)

SensComp 600 Series Specifications