Sense Labs Sense - Technical Specifications; Monitor and Sensor Specs; Compatibility and Usage

MUSR-PRNT-08.02 - RGB
Technical Specications
Sense is a home energy monitoring device.
It is used to measure the current and
voltage on the service mains. It monitors
two phases of 110/120VAC. If installed
outside, it must be kept dry and within
specied temperature ranges.
Current Sensor Specications
CAT IV 250V 200A max
Cable length: 46” | Inside diameter: 0.95”
May be used on uninsulated conductors
Monitor Specications
Compatibility: 120VAC (90v-130v)
Power Use: < 5 Watts, 0.1 amps
Wi-Fi: 2.4 GHz 802.11b/g/n
Size: 137mm x 66mm x 32mm
Weight: 200g
Climate Specications
RH <90%; IPx0 rating
Temperature: 0-68ºC
Elevation < 2,000m
Caution: The Sense monitor should be installed
by a qualied professional. Before installing,
please read and review the safety warnings.