Need help?Do you have a question about the Sensear SM1P and is the answer not in the manual?
General| Type | Earmuff |
|---|---|
| Noise Reduction Rating (NRR) | 25 dB |
| Battery Life | Up to 24 hours |
| Connectivity | Wired and Wireless |
| Intrinsically Safe | Yes |
| Bluetooth Version | 4.1 |
| Charging Time | 3 hours |
| Speaker Type | Dynamic |
| Weight | 350 g |
| Microphone | Noise-canceling |
| Operating Temperature | -20°C to 55°C |
| Impedance | 32 Ohm |
Details specific conditions for safe usage and cleaning of the product.
Step-by-step guide for fitting the headset with a behind-the-neck band.
Step-by-step guide for fitting the headset with a headband mount.
Step-by-step guide for fitting the headset onto a helmet.
Instructions for fitting the headset when using dual protection.
Guide on inserting and fitting foam ear tips for optimal protection.
Procedure for turning the headset on and off, including LED indications.
Explanation of SENS mode and how to toggle it.
Details on Quiet mode, allowing only communication audio.
How to enter and navigate setup mode for headset configuration.
Instructions for transmitting and receiving via two-way radio.
Information on using VOX with two-way radios.
Guide to using the headset's short-range communication features.
Instructions for operating the integrated FM radio functionality.
Steps for pairing and connecting Bluetooth devices.
How to manage calls via Bluetooth.
Information on using Bluetooth for audio streaming.
Explanation of the blue LED signals for pairing, connection, and calls.
Details the warranty period and terms for the product.
Instructions for product registration and obtaining service.
Safety information regarding product usage and radio frequency exposure.
Statement detailing compliance with FCC rules and regulations.
Lists directives and harmonized standards the product conforms to.
Details safety and PPE conformance, and type examination certificates.
Attenuation values for all mounts under ANSI S3.19-1974.
Attenuation values for all mounts under ANSI S12.6-2008.
Attenuation values for all mounts under AS/NZS 1270:2002.
Attenuation values for all mounts under EN352-1 and EN352-3.
Standards and markings for IS models.
Standards and markings for Ex models.
Entity parameters for Ex models.
To Next Page
