01 Getting Started
Hey ! I'm Sensica's
beauty consultant,
and I'm here to
help you with
some extra tips…
The massage feature
is all about getting
into the deep layers
of the skin - it's what
makes this device
so effective.
1. 48 hours before starting your first full
treatment, perform a preliminary test
on each area you intend to treat.
2. Plug the device into an electric socket.
You should see the “status indicator”
blinking yellow. (front light)
3. Make sure your skin is clean and dry,
free from creams and make up.
4. Apply an even layer of Base Gel on the
area intended for treatment.
5. Set the energy level by pressing the RF
button (see below) repeatedly,
until you reach the desired
level: 1, 2 or 3.
6. Press the Massage button
(see below) to set the desired
massage level: 1 or 2.
RF Button -
Massage Button -
Remember,
patience is key
Always do a
preliminary test
before beginning
a full treatment.
Start at RF level
3, and reduce the
energy level to
suit your comfort.
Hi, welcome to Sensica. We're so excited
for you to start your journey to younger
looking skin. Before you do your first
treatment, check out this Quick Guide
with extra tips for best results.
WWW.SENSICA.COM
MD 04181 A3
To Next Page
Need help?
General
