Sensidyne Gilian BDX-II User Manual (English)

Questions and Answers:

S
Shelley GillAug 4, 2025
Why am I unable to adjust the flow rate on my Sensidyne Water Pump?
- K
  kirkcameronAug 4, 2025
  If you can't adjust the flow rate on your Sensidyne Water Pump, it might be due to several reasons. First, the sampling filter cassette could be clogged; try removing it, and if the flow becomes adjustable, replace the filter cassette. Second, the system may have leaks in the tubing, assemblies, or internal filter; check for these and repair or replace the components as needed. If these steps don't resolve the issue, the valves, diaphragm or the pump motor might be damaged, requiring the unit to be returned to the factory for repair.
E
Edward MckenzieAug 12, 2025
Why won't my Sensidyne Water Pump run for the specified battery charge life?
- C
  Christine VincentAug 12, 2025
  If your Sensidyne Water Pump isn't running for the expected battery life, there are a few potential causes. Make sure the battery pack is correctly installed by disconnecting and reinstalling it. The battery pack may also be damaged or discharged, so try charging or replacing it as needed. Another possibility is that the batteries are exhibiting a 'memory' effect; fully discharge and then fully recharge the battery pack. If none of these steps work, the pump motor may be worn, requiring the unit to be returned to the factory for repair.
H
Hannah WhiteheadAug 19, 2025
How to fix a Sensidyne Water Pump that is running but has no flow?
- M
  melissacolonAug 19, 2025
  If your Sensidyne Water Pump is running but there's no flow (or reduced flow), the internal filter may be clogged. Remove the obstruction or replace the filter to solve this issue.