Sensus RadioRead 510 User Manual

4
Single Port – TouchCoupler Installation
1) While Model 510 Radio and TouchCoupler Spacer with TouchPad Cover all
still assembled, align the TouchPad Cover over the Sensus TouchPad that is
secured to the wall and press on whole assembly.
2) For additional support, open Model 510 Radio door and screw two screws
using the holes located above the battery compartment.
3) Once secured, activate unit (see activation section).

Sensus RadioRead 510 Specifications

General

Brand	Sensus
Model	RadioRead 510
Category	Transceiver
Language	English