Sentry Dual Mode Call Blocker User Manual

From Home screen, press UP/DOWN to nd the number.
Press and hold ACCEPT/REJECT button until DONE ashes. Now the
number is on White/Black List.
5. Adding a number to White/Black List
Press WHITE LIST button to show list, press UP/DOWN to nd the number.
Press DELETE twice quickly to erase that number.
Same for Black List.
6. Removing a number from White/Black List
To check if a number is on White List, press ACCEPT/WHITELIST button then
use UP/DOWN button to go through the White List. (Same for Black List)
4. Checking White/Black List
Operations Manual (Advanced Mode)
When NEW ashes, it indicates unchecked incoming calls.
Use UP/DOWN button to check call log.
3. Checking Call Log
Toggle VOICE button to set to A (English)
This is the Advanced Blocking mode with SENTRY’s Stop and Check.
2. Set VOICE to A
Setting Up
Wall Jack
Option 1 - In Line
Wall Jack
Line Splitter
SENTRYSENTRY
Option 2 – Parallel
Recommended
for AT&T / Vtech
phones
Recommended for
Panasonic / Uniden
phones
White List is key
Dual Mode Call Blocker
(Version 2.0)
1. Create White List.
Press and hold ACCEPT button to start.
Use UP/DOWN button to choose number, press REJECT button to move
to next digit. Use DELETE button to make corrections.
When all done, press ACCEPT button to save the number to White List.
Repeat above steps to add more numbers.
Press HOME to exit when nished.
Video instruction available on website (www.plugnblock.com)
To get the best result, you need to have a White List that includes
most of your 'good' callers' phone numbers. White list callers will
bypass SENTRY's Stop and Check procedure.
Please watch video instructions for details (www.plugnblock.com)

Sentry Dual Mode Call Blocker Specifications

General

Brand	Sentry
Model	Dual Mode Call Blocker
Category	Telephone Accessories
Language	English