SENZ SEMW2020W - Countertop Installation

13
COUNTERTOP INSTALLATION
Remove all packing materials and accessories. Examine the oven for any damages such
as dents or broken door. Do not install if the appliance is damaged.
Cabinet: Remove all protective clean lms on the microwave oven surface. Do not
remove the light brown Mica cover attaching to the oven cavity to protect the magne-
tron.
INSTALLATION
Select a level surface that can provide enough open space for the intake and/or
outlet vents.
1.
30 cm
20 cm
20 cm
0 cm
min 85cm
The minimum installation height is 85cm.
The rear surface of appliance shall be placed against a wall.
Leave a minimum space of 30cm above the appliance, a minimum space of 20cm
between the appliance and any adjacent walls.
Do not remove the legs from the bottom of the oven.
Blocking the intake and/or outlet vents can damage the appliance.
Place the appliance as far away from radios and TV as possible. Operation of
microwave oven may cause interference to your radio or TV reception.
1)
2)
3)
4)
5)
Plug your microwave oven into a standard household outlet.
Be sure its voltage and the frequency are the same as the voltage and the frequency
on the rating label.
2.
WARNING: Do not install microwave oven over a cook top or other heat-producing
appliance. If installed near a heatsource, the oven could be damaged and the warranty
would be void.
The accessible surface may be
hot during operation.