Receiving calls with locked keypad
If you receive a telephone call when the keypad is locked your radio can be customised so that the
Select/Send key can still be pressed to answer it. If the call is accepted the whole keypad is
unlocked. Your radio can also be customised so that you can press the Cancel/Home key to reject
the call and in this case the keypad remains locked.
Navi-knob with locked keypad
Your radio may be customised so that the Navi-knob is locked when the keypad is locked. In this
case you cannot alter the volume by rotating the Navi-knob.
Your radio can also be customised so that the Navi-knob remains unlocked and in this case it can be
used for volume control only while the keypad is locked.
To lock/unlock the keypad:
Press the * (star) key (or a designated soft key), then press the OK context key to lock/unlock the
keypad.
To quickly lock and unlock the keypad, press and hold (2 seconds) the * (star) key.
If you press any other key while the keypad is locked no action is taken. The Navi-knob remains
unlocked when the keypad lock is enabled. A message is displayed to remind you that the keypad is
locked.
Alternatively, you can:
1. Select Menu > Options > Settings > Keypad Lock.
2. Press Lock to lock the keypad.
Setting the radio to automatically lock the keypad
You can set the radio to automatically lock the keypad after a period of inactivity.
1. Select Menu > Options > Settings > Timed Keypad Lock.
2. Press Toggle to enable/disable auto keypad lock.
Home screen
The top level screen, known as the home screen, appears when the radio powers on and when it is
idle.
To quickly get back to the home Screen, press and hold (2 seconds) the Cancel/Home key.
The status line, at the top of the screen, displays various icons to indicate the state of operation or
when certain functions such as keypad lock have been activated. It can also be configured to display
the Network Name when the radio is idle.
12 SCC3 colour console
To Next Page
Loading...