Power on Alarm call
If your radio supports Radio User Assignment (RUA), which authenticates your radio on the
network, you may be prompted to log on to your network before the Alarm call is initiated. Contact
your service provider for information. See Authentication on page68.
Standard Operation
If your radio is powered off, press and hold (3 seconds) the Emergency button to power on and
initiate an Alarm call. Any customised Welcome screen is not displayed during power on. It may take
several seconds for the radio to complete its power on process before initiating the Alarm call.
Customised Operation (PIN entry bypass)
If your radio is powered off, press and hold (3 seconds) the Emergency button to power on and
initiate an Alarm call. Any customised Welcome screen is not displayed during power on. It may take
several seconds for the radio to complete its power on process before initiating the Alarm call.
If the radio is powered on and is at the PIN entry screen, pressing the Emergency button for 3
seconds will also initiate the Alarm call, without the need to enter your PIN.
User Guide 19
To Next Page
Loading...