11
6. Fit the SCC3 adapter plate
using the four screws
removed in step 2.
T10
MAX 0.5 Nm
IMPORTANT! Fit a SIM card before tting the SCC3
adapter plate. The SIM card is not accessible after the
SCC3 has been tted.
7. Remove the eight screws on the rear of the SCC3 and remove the
existing cover. Retain the screws for re-use.
5. Fit the connecting cable supplied in the mounting kit to
the front connector on the SCG22. Ensure the connector
is rmly clipped in position.
CAUTION! ESD precautions must be taken during
replacement of the rear cover.
To Next Page
Loading...