Need help?Do you have a question about the Sepura TETRA STP9000 Series and is the answer not in the manual?
General| Brand | Sepura |
|---|---|
| Model | TETRA STP9000 Series |
| Category | Touch terminals |
| Language | English |
Clean terminal exterior and screen using a lint-free cloth or mild detergent. Avoid abrasive materials.
Periodically clean connectors with dry or mild detergent-dampened cotton buds or lint-free cloths.
Clean antenna and connector with a soft brush. Refit antenna securely after removal.
Power off and remove battery. Clean contacts with a dry lint-free cloth or soft brush only.
Use approved sanitising wipes for terminal sanitation. Be aware of potential key mat coating degradation.
For salt water exposure, briefly immerse in fresh water and shake off excess. Allow to air dry.
Wear terminals on the body securely for accessibility and to reduce drop risk. Use Sepura accessories.
Use appropriate protective cases to prevent cosmetic damage and extend the terminal's operational life.
Check casing for penetrating scratches. Ensure all accessories and covers are fitted and secured.
Inspect antenna for damage, such as cracks. Replace if any signs of damage are present.
Check battery for damage and ensure it fits securely in the battery compartment.
Store batteries separately from the terminal. Ensure batteries are charged periodically to maintain performance.
Remove Smartcards and Micro SD cards from the terminal before placing it into storage.
To Next Page
