Illustration: Settings> Connection> Bluetooth Settings
(Different configuration functions are different, please
refer to the actual car)
1 Settings: Click to expand pairing settings.
2 Phone: Switch to allow/deny access to mobile
phones.
3 Music: Switch to allow/deny access to mobile
music.
4 Connect: Connect/disconnect this paired mobile
phone.
5 Delete: Delete this paired mobile phone.
• Once you forget a d evice, i f you
wa nt t o us e i t wit h th e vehicl e,
you n eed to pair it a gai n.
6 Cancel: Cancel the setting.
The phone will automatically disconnect when
leaving the vehicle.
WIFI connection
Wi-Fi can be used as a data connection method, which is
usually faster than cellular data network. When the cellular
network connection is restricted or there is no network
connection, you can use Wi-Fi connection.
Fast and reliable transmission of vehicle software updates.
You can connect to a Wi-Fi network through the following steps:
1. Turn on the Wi-Fi network in the system settings, the car will
automatically scan the Wi-Fi network and display the available list.
2. Select the Wi-Fi network you want to use, enter the password
(if necessary), and then confirm the connection to the Wi-Fi
network.
● Once connected to a certain network:
Whenever the vehicle is within its range, the
vehicle will automatically connect. If there are
multiple previously connected networks
within the range, the vehicle will connect to
the most recently used one.
● You can also use the Wi-Fi routing function to
create a car hot spot to share connections with
other devices.
To Next Page
Loading...