The following precautions shall be observed during
refueling:
• insert the refueling gun firmly into the
refueling nozzle.
•
do not start the vehicle until refueling
is completed and the fuel filler cover
plate is closed.
• stop oil filling after the automatic click of the
refueling gun.
• prevent fuel splashing, otherwise the paint on
the vehicle surface may be damaged.
llustration: the fuel filler is on the right side of the
vehicle
1. Open the filler cap.
The label on the inside of the filler cap shows the
correct information for the vehicle Fuel type.
2. Slowly open and remove the tank cap.
3. Place the fuel tank cap in the holder.
4. Fully insert the refueling gun into the refueling
port, and place the handle of the refueling gun
downward.
5. Operate the refueling gun to refuel the
vehicle. Do not add more fuel after the
automatic refueling gun stops refueling. Fuel
may spray back or overflow when heated.
6. After filling, please replace the fuel tank cap
immediately until you hear at least three clicks.
7. Close the filler cap and press on the rear until the
cap engages securely.
The emergency pull lock cannot activate the
refueling function when opening the refueling
cover, and the fuel tank pressure cannot be
released normally. It is necessary to slowly open
the fuel tank cover to prevent fuel splashing. At
the same time, it is necessary to slowly fill fuel to
prevent refueling gun jumping.
To Next Page
Loading...