Picture indication: Rotate the switch on the lever, turn
on/off the wiper
●
“ON”
The rear wiper automatically swings.
●
“OFF”
The rear wiper turns off.
Picture indication: Toggle the lever up and down to adjust the
wiper position
●
“2”
Wiper blades work at high speed.
●
“1”
The wiper works at low speed.
● “AUTO” The wiper automatically works
when the sensor detects rain, and the speed is
adjusted according to the amount of rain. The
sensitivity of the automatic wiper can be adjusted in
5 levels through the sensitivity knob in the middle of
the handle.
●
“OFF”
Turn off the wiper
.
●
“MIST”
The wiper sweeps once, and
then the lever automatically returns to the
original position.
Picture indication: Rotate the wheel on the lever to adjust
the wiper speed.
• Before using the wiper, please remove the ice
and snow from the windshield first, and make
sure that the wiper blade is not frozen in a fixed
position.
• If there are lines or stains on the windshield,
clean the windshield and wiper blades. If the
problem is still not solved, replace the wiper
blades with new ones.
• Never operate the wiper blade when the
windshield is dry.
To Next Page
Loading...