This pool cleaner was made to assist you in keeping your pool clean and
well-maintained in the easiest way possible. Here are ten important tips:
1. Once installed, your cleaner is designed to run for 4-6 hours and should
be able to clean an average sized pool in that time.
2. Your pool needs to be in good condition in order to use this cleaner. If
there are broken tiles, crumbling plaster, or tears in the vinyl, the
cleaner may damage your pool further as well as be damaged itself.
3. The cleaner is not designed to clean pool features, waterfalls, steps or
ladders. Those will need. to be cleaned manually with a brush.
4. The cleaner is not designed to run and clean under a solar cover.
5. Run your cleaner 2-3 times a week.
6. Do not wait until your pool is filthy to run the cleaner. The cleaner should
be considered a preventative maintenance for a clean pool.
7. The cleaner is meant to vacuum small debris and dirt from your pool.
Large debris and fallen objects will need to be removed manually.
8. This cleaner is not meant to replace chemical treatments. Continue
chemical treatments; remove the cleaner during shock treatments.
9. Before swimmers enter the pool, turn off the pump, unplug the hose,
cover the intake, and then move the cleaner and hose to an unused side
of the pool
10. Your cleaner should stay in the pool at all times, EXCEPT when it may
endanger or entangle swimmers. Dry storage will wear the cleaner/hose
more quickly than storage in a correctly balanced pool.
To Next Page
Loading...