Need help?Do you have a question about the SERTEL T-GPS-300 and is the answer not in the manual?
Details on fixing GPS antenna and connecting GPS receiver.
Connections between Master Clock, Comparator, Signal Conditioner, and Slave Clock.
Describes power supply, diode oring, signal booster, and output connections.
Lists the arrangement of GPS Receiver, Master Clock, Comparator, and Signal Conditioners.
Overview of Printed Circuit Board component layouts.
Visual representation of the system's electrical circuits.
Document confirming system testing and compliance.
Explains the Global Positioning System for time synchronization.
Details satellite distribution, orbital planes, and accuracy.
How the GPS receiver captures data and outputs time signals.
Lists all units comprising the Sertel Time Synchronisation System.
Details various signal conditioners for different outputs.
Provides model, type, gain, connector, and environmental specs for the GPS Antenna.
Details model, display, accuracy, input/output connectors, and dimensions.
Lists model, display, time reference, accuracy, and interface details.
Details model, display, time reference, accuracy, inputs, and outputs.
Details model, indication, inputs, outputs, and panel connections for pulse output.
Details model, display, inputs, outputs, and panel connections for RS232 output.
Details model, indication, inputs, outputs, and panel connections for IRIG B output.
Details model, display, inputs, outputs, and panel connections for TCP/IP output.
Details model, display, inputs, outputs, and panel connections for TCP/IP on NTP.
Details model, input/output signal, connectors, and modulation ratio for BCD output.
Maps pins to Hour, Minute, Second, and Ground connections for a 37-pin connector.
Details model, input, output, connectors, environment, and panel features.
Provides model, input, type, current rating, output, and panel details for redundancy.
Details display, input, power supply, connection, and environmental specs.
Describes features like optical isolation, protection, and specifications.
Details model, display, input, power supply, and environments.
Details model, display, input, power supply, connection, and environments.
Guides on installing and commissioning the GPS Master & Slave Clock System.
Explains how GPS Antenna, Receiver, Master Clocks, and Comparator interact.
Lists outputs generated by the Master Clock Redundant Comparator Units.
Lists features like channel tracking, data calculation, accuracy, and leap second adjustment.
Describes how to check if the GPS receiver is locked to satellites.
Details the intended applications and capabilities of the Master Clocks.
Steps for operating the Master Clock when GPS signal is unavailable.
Step-by-step guide to set the date using thumbwheel switches.
Step-by-step guide to set the time using thumbwheel switches.
Explains how the unit assesses synchronization and handles failures.
Defines the ASCII string format for time and date transmission.
Describes the serial asynchronous data port and its configuration.
Specifies protocol, baud rate, data bits, parity, and stop bit for the 002 format.
Details the format for transmitting absolute time using RS 232 V24.
Provides steps to install software for time synchronization with PC/Server.
Explains how EAD connects serial devices via Ethernet using IP Protocol.
Details the syncip.ini file parameters for network time synchronization.
Steps to change the system's IP address for NTP configuration.
Modifying registry settings for time synchronization services.
Configuring automatic synchronization with an Internet Time Server.
Instructions for synchronizing PC time using external software.
Procedures for time synchronization on Linux systems.
Describes pulse outputs (PPS, PPM, PPH) and their programmability.
Guide on using selector knobs for Second, Minute, Hour, and Day outputs.
Instructions for programming pulse outputs using thumbwheel switches.
Explains the IRIG-B format and its application in time synchronization.
Details the DCF77 time code, bit rate, and coding structure.
How DCF code operates on internal time base for quartz oscillator drift compensation.
Describes the 'Fast Code' and 'Slow Code' modes for time code format.
Details the voltage and current specifications for the optional current-loop output.
Lists available formats for time information output via RS-232/RS-485.
Describes pin assignments and the structure of time message data.
Outlines warranty period, exclusions, and conditions for the GPS Receiver System.
Details procedures for quality control, inspection, and contact for issues.
To Next Page
General