SEVERIN BA 3243 - Filling with Water; Iron Features and Maintenance; Anti-scale Filter Function; Anti-drip Function

12
104 x 142 mm
temperatures. Do not touch any part of
the appliance except the handle. Burns
can occur from touching the hot parts of
the housing or the soleplate and from
hot water or steam. Do not allow steam
to escape in the direction of anyone
nearby.
When operating the steam iron, hold
only by the handle.
∙ The iron should only be placed on
heat-resistant surfaces, never near hot
surfaces(eghot-plates)orinthevicinity
ofopengasames.
∙ Do not allow the power cord to touch
hot surfaces. Do not coil the power cord
round the appliance.
∙ Always remove the plug from the wall
socket
- after use,
- in case of any malfunction,
- before cleaning the appliance.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
∙ This appliance is intended for domestic
or similar applications, such as
- inshops,ofcesandothersimilar
working environments,
- in agricultural working environments,
- by customers in hotels, motels etc.
and similar establishments,
- in bed-and breakfast type
environments.
Anti-scale lter
Aspeciallterinthegeneratorreservoir
softens the water and reduces the build-up
of lime deposits in the sole plate.
Filling with water
Fill the water reservoir before using
the steam function or the spray nozzle.
Remove the plug from the wall socket
beforellingthereservoir.
∙ This steam iron is to a large extent
resistanttohardwater(upto15ºdH).
Although normal tap water may be
used, it is advisable to use distilled,
demineralisedordecalciedwater.
Should you be unsure about the
hardness of the water in your area,
please enquire of the relevant local
authority department.
∙ To prevent water from dripping from the
sole plate, ensure that the steam control
button(5)isclosed.Itshouldbeopened
only once the temperature level required
for steam ironing [as indicated on the
temperaturecontrolknob(2)]hasbeen
reached.
∙ Openthecoverofthewaterllhole.
∙ Fill the empty water reservoir using
the measuring cup provided. Fill the
reservoir to the indicated “Max” level
only.
∙ Closethewaterllhole.
Anti-drip function
If the temperature of the soleplate is not
sufcienttoproducesteam,thewater
supply is cut off automatically to prevent
dripping.