SEVERIN KA 5994 - Trouble-shooting

16
142 x 208 mm
Trouble-shooting
Problem Cause Solution
The appliance does not
work, and all buttons are
ashing.
The rotary control is set to
. Set the rotary control to .
No water/steam coming out. Watercontainernotlled. Fill water container.
Watercontainernotttedproperly. Fit water container correctly.
Unit has not preheated. Waituntilthebuttonsstopashing.
Water dripping from the
steam tube.
Steam/hot-water valve leaking.
Switch rotary control repeatedly between
and .
Milk is not properly frothed. Panarello blocked. Detach panarello and clean the air-intake
aperture on the side.
No espresso coming out.
The buttons are fast-
ashing.
Unit too hot. Let the unit cool down (see Making espresso,
Hint II)
No espresso coming out.
Rotary control in position
. Set control to .
Water container has run dry. Replenish water. Place a container under the
panarello and set rotary control to
, until
water is emitted steadily.
No Crema. Espresso powder too coarse. Usenercoffeepowder.
Coffeepowdernotsufciently
tampered.
Use slightly more pressure.
Espresso too weak. Espresso powder too coarse. Usenercoffeepowder.
Not enough espresso powder. Usemorecoffeepowdern.Reducecupll
quantity.
Espresso too strong. Espressopowdertoole. Use coarser powder.
Too much espresso powder. Uselesscoffeepowder.Increasecupllquantity.
Espressospillsfromthelter
holder rim.
Filterholdernotttedproperly. Re-tholdercorrectlyandlockproperly.
Espressopowderresidueonlter
holder rim.
Remove powder residue.
Excessive amount of espresso powder. Use less espresso powder.