3. Press . The minute digits start flashing.
4. Turn the rotary control to set the correct minutes.
5. Press
to finish setting the time. The symbol ‘ : ’ flashes and the correct time is shown.
The time setting process can be cancelled by pressing the
key.
The clock must be set when the appliance is connected for the first time, and also if a power failure
has reset the clock.
Kitchen timer
:
1. Press
twice. The display shows „00:00“.
2. Turn the rotary control to set the desired time.
3. Press
to activate the kitchen timer.
4. A 5-beep signal indicates that the pre-set time has elapsed and the clock reverts to the
normal display.
The maximum pre-programmable time is 95 minutes.
The microwave function
:
To programme the unit for cooking, the correct mode (microwave), the required power setting and
the cooking time must be selected, before the programme sequence can be started. The power setting
is selected by repeatedly pressing
, or by pressing once and then using the rotary control. The
cooking time can be pre-set to a maximum of 95 minutes.
Power settings
Power (P) Display Type
1 x 800 W P100 (100%) High Heating up liquids, cooking
2 x 640 W P 80 (80%)
Medium
high
Defrosting and heating up deep-frozen
dishes
3 x 400 W P 50 (50%) Medium Cooking delicate food
4 x 240 W P 30 (30%) Defrosting Defrosting food
5 x 80 W P 10 (10%) Defrosting Defrosting sensitive food
Example: to programme the microwave function for a cooking time of 5 minutes at 50% power.
1. Press
3 times, or press once and then use the rotary control to select the desired
power setting. The display shows P 50.
2. Press
to confirm.
3. Turn the rotary control, until the display shows 5:00.
4. Press
to start the programme.
Quick-programming
:
The most commonly used microwave time-settings can be called up simply by pressing
. With
this function, the microwave power setting is always 100%. Each press on the key adds 30 seconds to
the cooking time.
Note: the cooking process starts as soon as the key is pressed for the first time.
Example: to programme the microwave function for a cooking time of 2 minutes at 100% power.
1. Press
4 times. The display shows 2:00.
21
To Next Page
Loading...
