EasyManua.ls Logo

SEVERIN PG 8533 - Page 14

SEVERIN PG 8533
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
104 x 142 mm
Before the grill is used, always check
that the fat collection tray is correctly
tted in the barbecue grill.
The barbecue grill must be supervised
at all times during operation.
Do not allow the power cord to touch
any hot parts of the appliance.
Always remove the plug from the wall
socket
- after use,
- in case of any malfunction, and
- during cleaning.
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
The use of an extension-lead reel
causes a loss of power, possibly
combined with a subsequent heat build-
up in the cable. It is therefore necessary
to unwind the cable completely from the
reel. A reel may be used in a protected
outdoor area, but it must be of a type
approved for this purpose.
Caution: Do not move the grill when it
is in use. Before carrying, transporting
or storing the grill, ensure that is has
sufciently cooled down.
Ensure that the grill is not stored
outdoors, or in any other location where
it might be subjected to extremes of
temperature or high humidity.
No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
This product complies with all binding
CE labelling directives.
Overview and parts included
1. Fat collection tray
2. Power cord with plug
3. Wind-guard
4. Grill plate
5. Grip recesses
6. Thermostat control with indicator light
Art. no. 8533:
7. Main unit with base stand
8. Positioning guides on base stand
9. Holding bracket for main unit
10. Storage tray
11. Support leg
No illustration
12. 8 bolts
13. 8 wing nuts
Before using for the rst time
Remove any packaging materials and
stickers from the appliance and grill
plate; however, do not remove the
symbol on the wind-guard.
Clean the grill plate with warm soapy
water and dry thoroughly.
Wipe all other parts with a damp cloth
and dry thoroughly.
Grill assembly
Prior to assembly, check that all parts
are complete in accordance with the
section Overview and parts included.

Related product manuals