Seville Classics NSF - Parts List and Assembly; Component Identification; Assembly Steps

Parts List
A. S.S. Top (1)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
(800) 323-5565 or send an email to Support@SevilleClassics.com
1
B. Wire Shelf (1)
C. Poles (4 )
F. Basket (1)
E. Basket Track (2)
I. Feet (4)
H. Wheels (4)
G. Slip Sleeves (24)
2
Assembly Instrucons
STEP 1.
Fit caps to the bottom of
LEVELING FEET (I) and screw
into POLES (C).
OR, screw WHEELS (H) into
the base of POLES (C).
STEP. 2
Clip SLIP SLEEVES (G) around
bottom grooves.
IMPORTANT: Count up from
bottom grooves to make sure
all slip sleeves are at the same
height.
Fit SHELF (B) over slip sleeves
and press down.
STEP 3.
Repeat STEP 2 at the desired
height for the BASKET
TRACKS (E). Make sure the
tracks are at equal heights on
both sides of the cart.
STEP. 4
Clip SLIP SLEEVES (G) around
top grooves.
Fit TOP (A) over slip sleeves
and firmly press down. Ensure
a snug tight fit or the cart will
not be stable.
CONGRATULATIONS! Enjoy
your new stainless-steel
cart!
OR