Seville Classics WEB234 - Page 2

Parts List
A. Main table (1)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
(800) 323-5565 or send an email to Support@SevilleClassics.com
1
B. Side table (1)
C. Base (1)
D. T-Bar (1)
E. Mount (1)
F. Small cap (2)
G. Locking caster (2)
H. Caster (2)
I. Base sleeve (4)
J. Side table screw (2)
K. Base screw (4)
L. Knob (1)
M. Hex key (2)
N. Wrench (1)
O. Top screw (6)
2
STEP 1.
Screw pair of CASTERS (H) into open
side of BASE (C) using WRENCH (N).
Repeat on opposite side with
LOCKING CASTERS (G).
Press SMALL CAPS (F) into ends of
T-BAR (D).
Tighten KNOB (L) against t-bar.
STEP 2.
Install MOUNT (E) to the base of
MAIN TABLE (A) with TOP SCREWS
(O) using HEX KEY (M).
IMPORTANT!
Do not overghten screws.
Overghtening screws may
damage surface of table top.
STEP 3.
Install T-BAR (D) to MOUNT (E) with
TOP SCREWS (O) using HEX KEY (M).
Assembly Instrucons