SEW-Eurodrive DV160L Series User Manual

Gearmotors \ Industrial Gear Units \ Drive Electronics \ Drive Automation \ Services
AC Motors DR/DV/DT/DTE/DVE,
Asynchronous Servo Motors CT/CV
O perating Instructions
A6.C01
Edition 08/2004
11291613 / EN

SEW-Eurodrive DV160L Series Specifications

General

Series	DV160L
Category	Servo Drives
Input Voltage	3 x 380-480 V AC
Communication Interface	CANopen, PROFIBUS, Ethernet
Ambient Temperature	0°C to +40°C
Relative Humidity	Up to 95% (non-condensing)

Summary

Important Notes

Safety Notes

Mechanical Installation

Before you begin

Prerequisites and checks before starting mechanical installation.

Preliminary work

Steps to prepare the motor for installation, including cleaning.

Installing the motor

Instructions on how to mount and install the motor correctly.

Electrical Installation

Wiring notes

Connecting the motor

Detailed instructions on connecting the motor's wiring.

Connecting the motor using the IS plug connector

Instructions for connecting the motor via the IS plug connector.

Connect the motor using plug connectors AB.., AD.., AM.., AS

Connecting the motor using ASK1 plug connector

Connecting the brake

Instructions for connecting the motor's brake.

Startup

Prerequisites for startup

Essential checks and conditions before starting the motor.

Malfunctions

Motor Malfunctions

Brake problems

Inspection / Maintenance

Inspection and maintenance intervals

Preliminary work for motor and brake maintenance

Inspection / maintenance on the motor

Detailed steps for inspecting and maintaining the motor.

Inspection / maintenance of the BMG02 brake

Procedures for inspecting and maintaining the BMG02 brake.

Inspection / maintenance of the brake BR03

Procedures for inspecting and maintaining the BR03 brake.

Inspection / maintenance for BMG05-8, BM15-62 brakes

Maintenance procedures for BMG05-8 and BM15-62 brakes.

Inspection / maintenance of the BMG61/122 brake

Maintenance procedures for the BMG61/122 brake.