Manual – Fieldbus Interface INTERBUS UFI11A
37
5
INTERBUS Interface
The index range is subdivided into three logical areas. The UFI11A parameters are
addressed using indices 8300 – 8313dec. Indices below 8300dec can be used for ac-
cessing parameters which are not contained in the object list, or for addressing parame-
ters which are found on an inverter connected to the UFI11A.
Object description
of the UFI11A or
drive parameters
The parameters of the connected inverters are described in detail in the SEW document
"Parameter List." In addition to the parameter index, additional information about coding,
the range of values and the meaning of the parameter data is provided. The object de-
scription in the object list is identical for all parameters. Even read-only parameters are
given the Read all/Write all attribute in the object list because the inverter undertakes
the corresponding check itself and sends back a return code if necessary. The following
table shows the object description of all parameters.
Parameter index
(decimal)
Name of the communication object
8288 Variable data channel with acyclical routing (UFI11A and parameters of the con-
nected inverters can be reached)
8296 Download parameter block
8297 Last PCP index
8299 MOVILINK parameter channel acyclical (only UFI11A parameters can be rea-
ched)
8300 – 8313 UFI11A parameters
8314 – 9999 Parameters of the UFI11A or of an inverter connected to the UFI11A which can
be addressed via object 8288.
> 10000 Table, program and variable memory of the UFI11A or an inverter connected to
the UFI11A. These parameters can be addressed with object 8288.
Index: 8300 ... 8313
Object code: 7 (simple variable)
Data type index : 10 (octet string)
Length: 4
Local address:
Password:
Access groups:
Access rights: Read all/Write all
Name[16]: -
Extension length: -
To Next Page
Loading...
