SEW-Eurodrive INTERBUS UFI11A - Overview of the System; Copying data

1
4
Manual – Fieldbus Interface INTERBUS UFI11A
Overview of the System
1 Overview of the System
The UFI11A INTERBUS fieldbus interface serves as a gateway for connecting one or
more MOVIDRIVE, MOVIDRIVEcompact or MOVITRAC 07 inverters to INTERBUS. Se-
veral inverters can be connected to the INTERBUS UFI11A interface via the SBus. The
INTERBUS UFI11A interface provides the translation between the INTERBUS and the
SBus.
Copying data The UFI11A settings can be copied with the UBP11A parameter module from UFI11A
to UFI11A. For safety reasons, all inverters connected to the UFI11A must be turned off
when writing data.
05373AXX
Fig. 1: Overview of the system: INTERBUS master – UFI11A – inverter